Introduction: High Torque PCB Drilling Machine Using DC Motor.

Picture of High Torque PCB Drilling Machine Using DC Motor.

Easy and Simple step Homemade PCB drilling machine with high torque.

Use the motor removed fro, a old or waste Tape recoder for High torque.

Step 1: Components:-

Picture of Components:-

1. 6v DC motor - 1

2. Motor Coupler - 1

3. 1mm Drill Bit - 1

Step 2: Remove the Back Cover of the Motor and Solder It.

Picture of Remove the Back Cover of the Motor and Solder It.

For more visit :-

http://www.diyandtechhub.ml/diy-high-torque-pcb-drilling-machine-using-dc-motor/

Step 3: Final View

Picture of Final View

Step 4: Diy Video

Comments

Swansong (author)2017-10-16

Thanks for sharing. :) Could you include some more info in your steps?

About This Instructable

48views

2favorites

License:

More by diyandtechhub:DIY-Simple Water Level Indicator With Water Flow Signal for  Just 50rs/1$Android Mobile G-sensor Controlled Robo Car Via BluetoothHomemade Thermocol/Foam Cutting Machine.
Add instructable to: