Step 7: Assembly
1) Take your newly made ID holder and coin pouch. Lay the ID holder on top of the coin pouch (align the bottom edges together. both pieces are 2.75" wide so those should already be aligned) and fold the tape over that is on the ID holder
2) Cut a piece of tape 2.75" long and tape the bottom edges together (be sure to align the edge of the tape so it doesn't cover the ID holder window)
3) Cut a piece of tape 3.75" long and tape the left edges together (be sure to align the edge of the tape so it doesn't cover the ID holder window). It should look like Pic 2.
Set aside.
2) Cut a piece of tape 2.75" long and tape the bottom edges together (be sure to align the edge of the tape so it doesn't cover the ID holder window)
3) Cut a piece of tape 3.75" long and tape the left edges together (be sure to align the edge of the tape so it doesn't cover the ID holder window). It should look like Pic 2.
Set aside.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
