Instructables

Step 3:

now cut a line of 1cm or less on the cow to be able to insert the usb ( flash drive )..

you may want to insert the knife to make a hole inside the foam cow

Step 4:

Picture of

now start inserting the usb ( flash drive ) into the foam cow..

cut more if needed...

maybe you would like to use some crazy glue to place in the hole when the flash drive is in...

Step 5:


and your final result is your own foam cow usb...

thanks for reading/making this instructable
 
Remove these adsRemove these ads by Signing Up
urtlesquirt2 years ago
haha cool
where did you get the cow
Gateway (computer company) used to give customers a very similar cow with a system purchase years ago (around 1997?). Be aware there was a recall on them and this featured foam cow might have the same hazard, that pieces of it easily break off and can be a choking hazard to children.

Indeed, I have 2 of these cows and just sitting on a desk (nobody playing with them) the head is starting to crack and fall off.

Recall info,

http://www.cpsc.gov/cpscpub/prerel/prhtml00/00002.html
00002[1].jpg
eeliox (author)  moo of the cow3 years ago
i got it from a milk factory XD mi uncle is the owner
i got one at cows ice cream in wistler
mabster4 years ago
WhY iS YoUr TiTlE LiKe ThIs?
eeliox (author)  mabster4 years ago
idk ... lolz
I would change it, alt caps are worse than all caps.
eeliox (author)  JakeTobak4 years ago
changed lolz hehe