Introduction: Hobby RC Car Trailer!!!

Picture of Hobby RC Car Trailer!!!

How to make a cool looking professional trailer for your hobby rc car!!!

Step 1: The Bed

Picture of The Bed

Screw together 2 pieces of scrap metal. (Optional: Paint it.)

Step 2: The Wheels

Picture of The Wheels

Screw wheels from toy car on the middle.

Step 3: The Reciver

Picture of The Reciver

I used more scrap metal cut in an A shape for the reciver. Then I put a hole in the top.

Step 4: The Hitch

Picture of The Hitch

I cut scrap metal in this shape and put a screw through the middle.

Step 5: The Coupler

Picture of The Coupler

I put a washer on the screw than a screw on washer.

Step 6: Attaching the Hitch

Picture of Attaching the Hitch

I put it in my bumper then bent it over like this.

Step 7: Spare Tire and Level

Picture of Spare Tire and Level

I used a screw as the level and another toy wheel for the spare.

Step 8: Attaching the Trailer

Picture of Attaching the Trailer

The washer goes below the reciver and the screw on washer goes above the reciver.


Wired_Mist (author)2014-11-09

Not too bad, I like the spare tire!

nima0003 (author)Wired_Mist2014-11-09

Thanks, it's my first instructable. :-)

About This Instructable




More by nima0003:How to recycle HDPE plastic (bags, milk jugs, bottle caps, ETC)Hobby RC car trailer!!!
Add instructable to: