Step 5: Attaching the grilling surface
Attaching the grill is another step that is completely possible without welding (just not nearly as fun); however, if you were able to find a grill that fits snug enough you might not even need to do anything at all.
To attach the grilling surface:
1. Place the grill on top of the shopping cart. The ideal grill would have just the right amount of overhang to support itself on top of the cart. I was lucky enough to find the perfect size grill for my shopping cart sitting on the side of the road. As you can see in photo 2, the grill I had probably didn't need to be welded because most of it rested over the top of the cart, and the rest was pinched by the bars going to the handle.
2. Cut off the overhang, and weld the grill to the cart.
Your Hobobeque is now complete. Just give it another cleaning, and it will be ready to go for a test run.
To attach the grilling surface:
1. Place the grill on top of the shopping cart. The ideal grill would have just the right amount of overhang to support itself on top of the cart. I was lucky enough to find the perfect size grill for my shopping cart sitting on the side of the road. As you can see in photo 2, the grill I had probably didn't need to be welded because most of it rested over the top of the cart, and the rest was pinched by the bars going to the handle.
2. Cut off the overhang, and weld the grill to the cart.
Your Hobobeque is now complete. Just give it another cleaning, and it will be ready to go for a test run.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
LaBeasy says:
May 9, 2010. 12:30 PMReply
You should also attacha a colapsable table on the side to so that you have some sort of preparing sureface
Visit Our Store »
Go Pro Today »
