Print PDF
Favorite
Email
Step 2Tools
You will need:
- a scalpel or stanley knife
- a metal ruler
- a thick, dark pen or marker
- double-sided tape
- a soldering iron, preferably with a 4mm wide chisel tip
- access to an objet 3D printer, or similar rapid-prototyper machine - I know this is very unlikely, so I could either supply the part that requires it, or you could improvise, using some acrylic rod for the material, and a metal lathe to shape it(more detail later).
- a scalpel or stanley knife
- a metal ruler
- a thick, dark pen or marker
- double-sided tape
- a soldering iron, preferably with a 4mm wide chisel tip
- access to an objet 3D printer, or similar rapid-prototyper machine - I know this is very unlikely, so I could either supply the part that requires it, or you could improvise, using some acrylic rod for the material, and a metal lathe to shape it(more detail later).
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
