We want to create a home that protects itself using the internet of things technology.
We'll have PIR (photoelectric infrared ) sensors installed at the entry points of your house
We'll use servo motors to open and close the doors
We'll be using the Intep Galileo Gen 2

Step 1: Introduction

To get started, you'll first need to have the following tools in place:
PIR sensors
Servo Motor
LED s ,preferably red and blue

Step 3:

<p>Cool design. Could you say a little more about what you are making.</p>

About This Instructable




More by John NzauM:Home Based Security System using Intel IOT technology 
Add instructable to: