Print PDF
Favorite
Email
Step 7Rear Brace
The rear brace will serve two functions: It will stabilize the long dimension of the frame and also provide a second point to anchor the light brackets. You will now have to decide which end will be the left side and which is right
1. Measure a piece of angle iron to fit inside the legs. Mine was 60"
Mark the legs 1" up from the bottom.
2. Clamp the rear brace inside the back two legs and weld it in position.
1. Measure a piece of angle iron to fit inside the legs. Mine was 60"
Mark the legs 1" up from the bottom.
2. Clamp the rear brace inside the back two legs and weld it in position.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
