With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
In this Page, I will show you how to make an Homemade Collimator for your laser! A laser collimator is basically a laser beam adjuster.You could adjus...
Things needed: -Concave Lens, ---About the size of your Laser(Look at pictures) -Convex Lens, ---About the size of your Laser(Look at pictures) Should...
Step1: Test your lens(concave in front of laser, move convex lens back and forth) and write down the distance between the 2 lens that you think has th...
Step2: Heat up a knife until it's red, make sure the knife's handle isn't metal, if it is, make sure to wear gloves. Step3: Look at pictures below to ...
Step4: Cut off/file down the pieces until you think the lens will fit (screw the 2 pieces together and look at your measurements from Step1, look at D...
Step5: Mix a small amount of Epoxy glue, and use a toothpick to apply it to where you put the lens, look at the pictures below for a more detailed des...
Step6: Let it dry Now let it dry.Read your glue package for the recommended drying periods.You should let your lens dry in a upright position, so the ...
Step7: Use tape to stick it in front of your laser For more questions please PM me.Posted by Laser Community member: Vic
Step8: Your done!!! Have Fun!!!And be careful!!Remember, do not point into eyes, planes, vehicles, or any moving objects, etc... If you want to see m...
Remove these ads by
Signing Up
Not NiceInappropriateSpam62,785 views
91 favorites
Posted:
Nov 26, 2007
License:
None (All Rights Reserved)
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »