Step 8: Step 8--YOUR DONE!!!!!!!!!!!!!!

Step8: Your done!!!
Have Fun!!!
And be careful!!
Remember, do not point into eyes, planes, vehicles, or any moving objects, etc...

If you want to see my laser performance, click HERE.

For more questions please PM me.
You can also find the original here: http://www.lasercommunity.com/lc_view_project.php?aid=16

To visit a laser forum press:
To buy a High-Quality Laser visit:
Posted by Laser Community member: Vic
<p>Nice, but I don't understand a couple of things:</p><p>I'm a bit confused about the steps. I don't see pictures on how to put it together, just repeated images of where the lenses go.</p><p>What is a source for the lenses? My junked camera, for instance, have a concave lens but it is too big to fit in the pen design. Where did you get yours?</p><p>You gave a link called &quot;HERE&quot; to go to the YouTube page where we can see your modified laser performing. However , the link points to your YT personal page. I don't know which video to look at. I would like to see your modified laser perform under different collimation adjustments.</p>
does the sled ting in the dvd player have a collimator on it? if it does i will use that
The sled from the DVD player does have lens in it, but those lens may not be right for collimation.
all of the lasers i have taken out have coveres with lenses inside in the same order as your collimator so i think they have collimators
Yes, those lens are correct for focusing the laser light onto the discs, they may not work for adjusting to a distance.
ahh ok
can u use this to make a laser burn?<br>
This device could possibly make your laser burn items, if your laser has the right power output for the desired item for burning. This device will not make your laser burn, if that's what you're asking also.
hmm.... i wanna ask.... what it really use for?<br>did the tools and what we need easy to get? how the tools do?<br>thank you~
use to make beam thinner and go farther, tools are on the page.
how can u tell the difference between the lens<br />
Between concave and convex lenses?<br /> If these lenses are at a greater index of refraction than it's surroundings, then for concave lenses, when light passes through them, the light will diverge(spread apart); and for convex lenses, light will converge(intersect then spread apart).<br />
<p>i only got 1 question:<br /> where would i get a concave lens from?</p>
You can get them from disposible cameras, old cameras, binoculars, telescopes, etc..<br />
kool thx.
Wicked Lasers is overpriced. I donut wanna buy a 80 5mW laser that I could buy in the dollar store. Making my own now from a DVD...
<div style="margin: 0.0cm 0.0cm 10.0pt;">I&rsquo;m going to try to make a big laser from scratch, would this still work if it were up-scaled(I mean really up-scaled)?</div>
Ya, it would work, you'd just need lens that are up-scaled too<br />
<div style="margin: 0.0cm 0.0cm 10.0pt;">Ok cheers, the beam itself will probably be either infrared or Ultra-violet (probably ultra-violet) and (if it works) will probably fry everything in its path, is there a formula you predict the optimum measurements? Instead of trial and error.</div>
You'd need precise measurement tools to use formulas, it would be better to use trial and error.<br />
ok cheers
please make more clear!!!!!!!
What do you not understand?
Wicked laser go buy some bad quality lasers for overpriced prices that are underespec and we censore our forums (lasercommunity) and never reply to your questions yahh!!
where do i get cocave and convex lenses!!!!!!!!!????
vcw just said where <em>twice!!!</em> try to read like a normal person, please.<br/>
make that <em> thrice</em><br/>
You could search the Internet. I used lens from an old digital camera. Try to find a cheap used/broken digital camera from ebay and take it apart for the lens. The lens from my digital camera were also high quality.
can u clearly explain this step or send me pics to my mail............ minutestomidnight352@gmail.com
Just put a concave lens in front of your laser and a convex lens in front of the concave lens, then move your conv away and towards the concave lens and find the best measurements.
Do you know if this is precise enough to keep a beam parallel for long distances. I've got a laser pointer and the beam is nice and thin as it comes out, but 100 metres away it has diverged to 15cm wide. The beam is almost parallel but not quite and I would imagine the lens alignment would have to be precise - maybe with one person 100 metres away shouting back the beam width. Have you done any experiments along these lines?
a beam can never be perfect. that would mean it has a divergence of 0mRad, or it doesnt expand at all as it goes out. the lowest mRad I've seen in a laser is 1.0, my phoenix has a mRad of about 2.5. but with a lens you could probably adjust a laser to have a mRad of like 1 or
lol scratch that - phoenix lasers have way less mrad - my memory must be fading. an average laser probably has somewhere from .8mRad to 2.0mRad. with a lens I've managed to reach like .4mRad
if you use metal threads and have a hole that you can stick a pencil or wire in to adjust it for accuracy (because it is long and can make little adjustments) ... or who knows, maybe this is fine i think there can be a little angle, it doesn't have to be dead center through the lenses
How about mounting the lens in something bigger like a block of wood then having the lead screws on the side of the block? One could then get higher accuracy. I also read somewhere about using a telescope - focus it on a distant object then place the laser at the point where your eye was and fire the beam back through the telescope and it will focus on the point you were focussed on. I can't find the reference but it makes sense. Off to ebay to look for cheap telescopes/binoculars..
i dont know if that would work, a laser just shoots in a (relatively) strait .5mm line forward, an eye has a (auto adjusting) lens with light that meet at a single point. if you used a telescope, most of the laser power would be cut away... i think
Monocular telescope finally arrived yesterday and it works. It is possible to focus to a point at minimum 30 metres to maximum infinity. At infinity focus the beam comes out about 20mm wide but stays that width 100m away. This compares with a bare laser pointer which comes out at <1mm and diverges to 300mm at 100m. A lot of power is lost in the telescope but because the light ends up focussed, when set to focus at 100m the light at the point ends up much brighter. I am going to start building a long range communicator with the receiver a metre or so of pipe (?90mm) painted black on the inside to block out sunlight. Will post once it is working.
I found a link <a rel="nofollow" href="http://forum.physorg.com/index.php?showtopic=268">http://forum.physorg.com/index.php?showtopic=268</a> Leaving aside the semantics of dispersion vs divergence, there is a good description of how to do this with a telescope. I've just ordered a telescope off ebay - will do some experiments hopefully next week. <br/>
I haven't done any measurements with the divergence, but there is a big diffrence when using it. If you would want this collimator to be precise, you would need the screws to be extra small, and it would take quite some time doing it alone.
so, can you attach this to the front of a regular, red, laser pointer and use it to, say, pop a balloon?
Were can I find proper lenses to do this? did you buy them or salvage them from somewhere?
THe lens I used were from an old digital camera.
were did u get the lenses
I got my lens from a old digital camera.
Lasers can be very dangerous and can blind someone. This should be made very clear! While your Instructable may be fun for some, due to the potential for injury, especially to children, I cannot recommend it. I will give you credit for your imagination though.
nice, on instructables a lot more people will see it than on lasercommunity. Good job moving it
Its cool that wicked might tweak ur design and make a lens cap 2!! <br/><br/>check out mine and the best of luck to u<br/><a rel="nofollow" href="http://www.instructables.com/id/Personal-Wicked-Laser-Light-Show/">Personal Wicked Laser Light Show</a><br/> <br/>
Can't you just use a saw to cut the plastic?
You could do that too.
Well, now I'm saying "duh" to myself LOL.

About This Instructable