Print PDF
Favorite
Email
Step 5Cut out the parts
I clamped it in a vise and used a sawzall with a hacksaw blade to cut out the parts.
Stainless steel workhardens quickly and conducts heat poorly.
That means you need to use a sharp blade with a slow deep cut.
The other way is use a dull blade and just melt your way through it.
Stainless steel workhardens quickly and conducts heat poorly.
That means you need to use a sharp blade with a slow deep cut.
The other way is use a dull blade and just melt your way through it.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
