With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
share step-by-step photos with text instructions
share one or more photos in one step quickly and easily
share your how-to video
Hey everyone, this is my second instructable I think the big thing I learned from the last one is: THIS IS A STEP BY STEP PROJECT, PLEASE READ ALL T...
Here's the parts, it's a pretty comprehensive list. You can however add to it or modify it if you feel you have a better design. You will need a pre...
use plenty of teflon tape, this will make sure that your snowgun doesn't leak. Every male thread will need at least (don't be too worried about using...
If you are not using hoses, ignore this step and just connect your adapters (the one for the pressure washer and the one for the air compressor where ...
So attach one of the street elbows to one of the T fittings on the top of the 'T' (see picture) Brass is really soft, so be careful if you are using...
Now attach one of the nipples to the other side of the 'T' fitting from the last step.
Now attach a T fitting to the hose with the pressure washer adapter on it. (if you are using your own hoses this is where you would attach the pressu...
Now add another nipple to the open side of the T fitting from the last step.
Now lets start a new section. Start by attaching the air hose to the other street elbow. And then connect that street elbow to a T fitting (see pict...
Now attach a close nipple to the bottom of the T fitting from the last step (see picture)
Now attach a bushing to the open nipple from the last step. (picture coming soon)
Now attach the other bushing to the other nipple from the part we finished with in step 7. (picture coming soon)
Cover the threads on the bushings with teflon tape and then attach the gate valve between the two bushings. (picture coming soon)
Now it's time to install the nozzles. Install the two MSM0204 nozzles in the street elbow and T closest to the top. Remember the Teflon tape on the ...
Check the temperatures, this snowgun will only work when the wetbulb temperatures are below -1C or 30F. If you don't have the wetbulb temperatures on...
It's not quite that easy, follow these steps to ensure success. 1) Close your gate valve all the way 2) turn on your air compressor 3) turn on the wa...
External Mix Snowmaker (aka snowgun)by MakeSnow
Build a 6'8" Lighted Statue of Liberty Made of Snowby mcmuffin95
Little Snowman in a small balconyby mossberry
Fixing The Snowman Evaporative Snow Machineby chesterjohn
Surviving a Snow State of Emergencyby Josehf Murchison
the SuperSnowman, the Snow Dog and the Turtle got ready to jumpby hertzgamma
Snow Carving - It is snow much fun!by m bedi
Paper Snowflakesby CYNICALifornia
Vanilla Bourbon Snow Ice Creamby suchandsuchfarm
A Successful Snow Camping Tripby rocketman7
Download our new apps for iOS, Android and Windows 8!
© 2014 Autodesk, Inc.
PDF DownloadsAs a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.