Print PDF
Favorite
Email
Step 3Attaching the neck to the tambourine
This is how the neck is attached to the tambourine.
I drilled the heel and the hardwood and put two gudgeons to prevent the neck from rotating around the threaded rod.
The aluminium tube is cut to the exact internal size of the tambourine. Use washers everywhere it's possible (better look and finish and preventing loose fixation). Finish by nuts on the threaded rod.
I drilled the heel and the hardwood and put two gudgeons to prevent the neck from rotating around the threaded rod.
The aluminium tube is cut to the exact internal size of the tambourine. Use washers everywhere it's possible (better look and finish and preventing loose fixation). Finish by nuts on the threaded rod.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
