Print PDF
Favorite
Email
Step 5Finish!
You are now finished!
Screw in everything, and submerge in water before putting the laser in the flash light.
When you know that water does not leak, you can put the laser in the flash light via the top.
I used a piece of tape to hold down the bottom while it is in the maglite.
Screw in everything, and submerge in water before putting the laser in the flash light.
When you know that water does not leak, you can put the laser in the flash light via the top.
I used a piece of tape to hold down the bottom while it is in the maglite.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
