Print PDF
Favorite
Email
Step 2Layout
Attached is a AutoCAD drawing that I made of the box layout. I saved it as a PDF so that a lot more people could view it.
Square up the cardboard using the corrugation marks on the face of the cardboard. And then start to layout the cuts and folds on the cardboard blank. Double check all your measurements and layout marks. I even messed up on this and didn't layout the top of the box correctly. Live and learn.
Square up the cardboard using the corrugation marks on the face of the cardboard. And then start to layout the cuts and folds on the cardboard blank. Double check all your measurements and layout marks. I even messed up on this and didn't layout the top of the box correctly. Live and learn.
| « Previous Step | Download PDFView All Steps | Next Step » |
5
comments
|
Add Comment
|
Feb 6, 2009. 11:16 AMwolfganges
says:
Hi! Can you please tell me are these cm (centimeters) or ft? cheers wolfgang
Reply
7
Feb 6, 2009. 11:45 AMausable (author)
says:
The measurements are in inches on the PDF.
Reply
Feb 6, 2009. 12:12 PMwolfganges
says:
thanks! now I can start creating my cardboard magazine box!
Reply
7
Feb 6, 2009. 1:45 PMausable (author)
says:
you're welcome
Reply
Feb 15, 2008. 5:43 PMrodelu
says:
Good instructable - but I hope you put something under the cardboard before you cut - it'd be a shame to cut through that hardwood floor!
Reply
7
Feb 15, 2008. 6:49 PMausable (author)
says:
The floor is laminate, and it's totally messed up. But I just cut it in my lap, with the self healing mat on my lap
Reply
 |
Add Comment
|
