Print PDF
Favorite
Email
Step 4Melting Stuff = YAY!!
Because the fabric glue stick does not melt well without help, you may need to push it against the bottom of the tin with a toothpick. The reason it does not melt well is because of density... the not melted part of the glue stick seems to float on top of the the melted parts, keeping it away from the heat.
If the wax bubbles or pops at any time in this procedure, it is too hot! Take it away from the flame for a minute.
If the wax bubbles or pops at any time in this procedure, it is too hot! Take it away from the flame for a minute.
| « Previous Step | Download PDFView All Steps | Next Step » |
2
comments
|
Add Comment
|
Dec 19, 2010. 7:50 AMbaronbrian
says:
You might try shaving the glue into slivers some how (pocket knife, kitchen grater, whatever). That way it will melt better. You can do the same thing with wax to make it melt easier.
Reply
41
Dec 19, 2010. 4:45 PM
nepheron (author)
says:
nepheron (author)
says:
Thanks, I hadn't thought of that!
Reply
 |
Add Comment
|
