Print PDF
Favorite
Email
Step 2Tools and supplies
You will need:
a large plastic container,
I used a recycling bin which is now defunct as the council have just switched to wheelie bins.
some clear plastic,
perspex (plexiglass) will do, i actually used polystyrene as it was what i had lying around
some strong adhesive,
no more nails or similar is perfect
some wire mesh,
mine was from the grill of a truck, and old grill tray would work even better
2 small blocks of wood and some screws,
these are to hold the tray off the floor, virtually anything could be used
Tools:
jigsaw or fret saw
tenon saw
hacksaw
drill (hand or power) with bit big enough to get your jigsaw or fretsaw blade in
files for finishing
screwdriver
a large plastic container,
I used a recycling bin which is now defunct as the council have just switched to wheelie bins.
some clear plastic,
perspex (plexiglass) will do, i actually used polystyrene as it was what i had lying around
some strong adhesive,
no more nails or similar is perfect
some wire mesh,
mine was from the grill of a truck, and old grill tray would work even better
2 small blocks of wood and some screws,
these are to hold the tray off the floor, virtually anything could be used
Tools:
jigsaw or fret saw
tenon saw
hacksaw
drill (hand or power) with bit big enough to get your jigsaw or fretsaw blade in
files for finishing
screwdriver
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
