Print PDF
Favorite
Email
Step 3The Method - Lid
1. Mark the window hole in the lid, leaving atleast an inch of room all the way round.
2. Drill a hole in the centre to get the blade in.
3. Cut out the hole using the jigsaw or fretsaw
4. Round off the edges with a file.
5. Cut a piece of clear plastic to size, atleast an inch bigger all round than the hole, with a jigsaw or tenon saw.
6. Glue the clear plastic to the underside of the lid with no more nails or similar adhesive and allow to set for 24 hours.
2. Drill a hole in the centre to get the blade in.
3. Cut out the hole using the jigsaw or fretsaw
4. Round off the edges with a file.
5. Cut a piece of clear plastic to size, atleast an inch bigger all round than the hole, with a jigsaw or tenon saw.
6. Glue the clear plastic to the underside of the lid with no more nails or similar adhesive and allow to set for 24 hours.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
