Introduction: Homemade Belt Buckle From Hanger ― DIY

Picture of Homemade Belt Buckle From Hanger ― DIY

Quick belt buckle made from a hanger.

You need:

  1. 1 hanger
  2. 1 plier
  3. needle and thread

Step 1: Cut and Bend the Hanger

Picture of Cut and Bend the Hanger

Be carefull you need when you blend the wire, use a paper to protect the plastic coating (just for esthetic)

Try to make the gap as small as possible: the easiest way is to cut the wire only at the end, that way you don't have any gap

Step 2: Sew the Belt

Picture of Sew the Belt


BeachsideHank (author)2015-04-14

Clever, although metal hangers are starting to be replaced by molded plastic ones maybe that would make another interesting build.

About This Instructable



More by hobhob:Seat post adaptor made with soda cans​How to make quick bike bags - panniers from used jerrycansHomemade belt buckle from hanger ― DIY
Add instructable to: