Instructables
Picture of Homemake Wooden GoKart 2.0
Well, after my first and mostly successful wooden gokart, I decided to build a sturdier and better one. I used the same wheels, engine, axles, and seat from the first one. For specific details on mounting the engine, sprocket, and wheels, visit my first gokart.  This is definitely an improvement from the first. For your convenience, I made a 3D Sketchup model. Download it here. The following steps contain pictures from Sketchup. I recommend you use Sketchup to find the exact dimensions.
 
Remove these adsRemove these ads by Signing Up

Step 1: Step one

Picture of Step one
Put two 3 1/2" x 1 1/2" x 75" beams 3 1/2" apart.

Step 3: Step Three

Attach two 15" long beams

Step 4: Step Four

Picture of Step Four
Screen shot 2012-05-30 at 9.06.42 PM.png
Attach a 10 1/2" long beam to tilt the seat bottom. Install the seat bottom.

Step 5: Step Five

Picture of Step Five
Screen shot 2012-05-30 at 9.07.57 PM.png
Attach the seat back and install a brace. Place the engine on the mount.

Step 6: Step Six

Attach a beam underneath the engine, and install blocks underneath that on either side. Drill holes through either side for the axle. Insert axle and and attach sprocket to axle or wheel then install wheels.

Step 7: Step Seven

Picture of Step Seven
Do the same for the front. Add blocks, axle, and wheels.

Step 9: Finished

Hopefully, I have given you a complete tutorial on how to build your own gokart. Some things on the Sketchup version may be slightly different from the real gokart, but the dimensions are accurate.
neonkid11 months ago
brakes?