Print PDF
Favorite
Email
Step 18Make the plaque
cut a piece of hard cardboard (I used a bit from the back of an old drawing pad) in to an oblong plaque shape. For a really nice effect cut the edges at an angle.
Put two small blobs of glue gun glue on the plaque, one at either end to look like screw or rivet heads and paint or spray the plaque gold or silver.
At this point you could write the name of the person to whom you are intending to present this trophy on the plaque if you want.
Put two small blobs of glue gun glue on the plaque, one at either end to look like screw or rivet heads and paint or spray the plaque gold or silver.
At this point you could write the name of the person to whom you are intending to present this trophy on the plaque if you want.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
