Introduction: Honeycomb Plug (lobe Jewelry)
Figured it was a good time to stretch one of my lobes. So I built a new plug on my 3D printer for my left lobe.
Step 1: Machine on the Job
On CAD I designed the wearable to be 9/16" wide and the diameter to be 1" 7/8" diameter. Set it all over to the 3D printer. 1 hour and 23 minutes later it was done.
Step 2: Enter the Lobe
Got it off the heated build platform and let it cool down some. A good 10 minutes later it was a perfect fit. Thank you for taking your time to check my project out. It means a great deal to me.