With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
share step-by-step photos with text instructions
share one or more photos in one step quickly and easily
share your how-to video
Here is a very unique device meant to be put on the top of your car. There is a camera at one end and a servo motor on the other side (the servo is ac...
Mechanical components - Suctions cups - Aluminum rod, 1/2 x 1/2 8 feet long - Plywood 24" by 5" - 1/4 20 2-1/2" long - 1/4 nuts - 1/4 washer - 2,5 Lbs...
I saw this video on youtube of someone showing up how to attach a standard camera to a car via suction cups. They use the Fast Cap suctions cups foun...
This is the key of this projet, the servo motor (the gear box is actually pretty powerfull). http://www.servocity.com/html/spg805a-bm-360__360o_rotat...
Here is the CAD I did in Solidworks. I wanted to validate different aspects of the project before starting it.
Since I have this very long pole with a camera at the end, I wanted to make sure that everything is balanced. I wanted to remove any stress on the sha...
Please have a look at the PDF, it's in "high resolution"! The most important part is the "Y" harness. The servo consumes a lot of current and the gyr...
Please be aware: to simplify the pictures, I did not install the power switch. The one for the servo and the one for the receiver.
Since I need to move the entire setup from place to place, I decided to have a mechanism in place so I could remove the boom from the servo with 2 bol...
I added cables to make the entire setup rigid. This improvement was done to minimize the vibration of the system. The same principle can be observed ...
There is still a lot of improvements to be made on the system. Here is the very first prototype as well as the latest version which is the most robus...
If I want to put that on Ken Block car, I need something a little bit more hardcore! Like this from servocity http://www.servocity.com/html/super_dut...
Tag files as:
Posted:Jun 5, 2012
License:None (All Rights Reserved)
How 2.0: Hack a Bat - the Ryan Howard Speed Test
Accelerometer & Gyro Tutorial
Coil Gun Projectiles
Gopro Hero 3 Black Edition IP camera
Motion Controlled Robotic Arm
Angle measurement using gyro, accelerometer and Arduino
GOPRO lens cover
An Aesthetically Pleasing Wireless Wii Sensor Bar
10 Dollar GoPro Monopod!!!
Download our new apps for iOS and android!
PDF DownloadsAs a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.