With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Creating Hot Wheels flash drives.
A hot wheels car cost around one dollar, these 8 gig flash drive cost about $6 online. For this project I used a drill, Dremel, propane torch, hot ...
Pry apart the flash drive, I used some heat shrink electrical wrap to insulate the flash drive after it is removed from the case.
Take the hot wheels car apart by drilling the head of the rivets off flush with the bottom of the car. (I like to use the cars with a plastic bottom a...
The hot wheels cars come apart into 4 parts, the metal body, the windshield, the interior, and the bottom with wheel and axles.
I use a Dremel tool to cut away enough of each section for the flash drive to have room.
Dry fit the sections together with the flash drive to check the fit. When it all fits together correctly, take it back apart and reassemble using hot ...
When inserted into a computer the led on the flash drive will light up and be visible thru the windshield.
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Remove these ads by
Visit Our Store »
Go Pro Today »
CHRISTMAS. PRESENTS.