Hot dog pirate ships

Picture of Hot dog pirate ships
These foam pirate ships to serve your hot dogs in, are a cute addition to a pirate or halloween party.
Remove these adsRemove these ads by Signing Up

Step 1: Cutting

Picture of Cutting
I started with a large sheet of black foam that you can buy at any craft store. You can make 4 ships with each sheet of foam.

1.Cut it horizontally.
2.Cut it vertically.

Step 2: Forming the ship

1. Fold one rectangle in half. Mark with chalk where you will cut. You might have to play with this, but on my ships I cut a triangle with both legs measuring about 1 in. off. I would recommend making one, testing it and then using it as your template.
2. Cut.
3. Staple all along the side, leaving only the top of your ship open.

Step 3: Folding

1. Turn it right side out.
2. Fold down the top until it reaches the bottom of the ship. So in half. This will help your ship stand up on it's own.
3. Crease it real good.
4. Add stickers and a flag taped or glued onto a straw. You could also use popscile sticks, but the bendy part of the straw hold the flag nicely and we had them on hand.