Introduction: HotFlash Drive

Picture of HotFlash Drive

This a tutorial on how to make a flash drive using a Maisto car.

Step 1: Materials Needed

Picture of Materials Needed

1. A cheap flash drive: I found a 2gb one on ebay.
2. A desired hot wheels car or other brand. (This one is an 2004 Chevrolet Silverado SS by Maisto).
3. Super Glue: found mine at a dollar store.
4. dreamel (rotary tool).
5. 3M double face tape.
6. Patience.

Step 2: Tearing Apart

Picture of Tearing Apart

Tear apart the car DUB is better because you can unscrew it the easy way.
The tear apart the flash drive (depends on the type of flash drive).

Step 3: Making It Fit...

Picture of Making It Fit...

Cut with dreamel until the flash drive boar fits on the car.

Step 4: Pasting the Board.

Picture of Pasting the Board.

Paste the board with 3M double face tape.

Step 5: Make It Clean...

Picture of Make It Clean...

Put back all the stuff together using the Super Glue.

Step 6: ...And the Final Product

Picture of ...And the Final Product

I used a 2004 Chevrolet Silverado SS made by Maisto.


biomech75 (author)2009-09-09

thanx for all the comments

hart531213 (author)2009-09-02

You should have wired up to 3mm LEDs for the headlights to the Data + and the ground that way they flash when ever you transfer files back and forth that would look sick

stephenniall (author)2009-09-01

Imagine in the future if we all had Usb ports to refuel ! Love your creation

About This Instructable



Bio: Evo 8, Honda K, B Engines Mods
More by biomech75:Arduino thumbstick controllerArduino+Servo+PotentiometerArduino Robotic Arm
Add instructable to: