Print PDF
Favorite
Email
Step 5Anchor harp and MidiTron to the wall
Paint your 2x4s. Now locate the studs in the wall and attach the 2x4s. When you attach the bottom 2x4 be sure its distance is farther than the longest measurement of your IR sensors. You don't want the bottom bar setting off the sensors automatically.
Screw in your U-channel with the IR sensors facing downward to the top 2 x 4. Screw in the bottom U-channel to the bottom 2 x 4. Now anchor your Miditron to the wall. We hid ours under a tambourine. Then cut and strip your wires, so they reach the MidiTron, Leave slack so they don't pull out of the sensors.
Infra-red sensors know exactly where your hands are, and you can digitize any kind of music.
So now you can start composing your off-the-wall symphony!
http://www.2pointhome.com
Screw in your U-channel with the IR sensors facing downward to the top 2 x 4. Screw in the bottom U-channel to the bottom 2 x 4. Now anchor your Miditron to the wall. We hid ours under a tambourine. Then cut and strip your wires, so they reach the MidiTron, Leave slack so they don't pull out of the sensors.
Infra-red sensors know exactly where your hands are, and you can digitize any kind of music.
So now you can start composing your off-the-wall symphony!
http://www.2pointhome.com
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
