How I Rack-mounted my Line 6 Pod Guitar Effects Processor

Step 10 Finale and Parts List

Just some final shots of the unit in the rack - much better!

Here's a list of parts used to get this done (purchased from both Mouser and Jameco)

Mouser:
103-1211-EV - Pushbutton Switch (x8)
540-SRB22A2FBBNN - Rocker Switch
589-7100-410 - ProtoBoard (10x4")
696-SSA-LXB10GW - 10 segment LED bargraph (green)
696-SSL-LX2573GD - 5mm x 2mm LED (green - x20)
604-SC56-21GWA - 7 segment LED (green x2)
565-7160 - 1/4" stereo jack (3 cond. x 5)
161-0005 - 5 pin DIN MIDI Jack (female x 3)
546-RMCV19018BK1 - Rackmount Enclosure - 1U x 8" deep

Jameco -
Toggle Switch (AIR): 75969CB
22 AWG Hookup Wire: (100', black): 36792 and/or (100' red): 36856 - solid
1/4 watt 220 ohm resistors (min. 100)- 690700
1x 74HC14 (hex inverter): 45364


Random hardware I had around...
PCB Standoffs (4x for PCB)
3/4" x 3/4" (1/16" thick) aluminum L bracket
Screws/Nuts for DIN Jacks (6x)
Screws/Nuts for Alum. LBracket/Plates