loading

Step 1: Camera Rigging

Middle right image is a home made (this entire project was home made, literally) camera rig designed to allow the camera to travel smoothly up and around the OSULRC-1. The rigging is made from 2x4 joist bracket and some wood. The long 2x4 was lightly sanded and wiped with beeswax to make the surface smooth to slide the camera rig across. Space was cramped in a two car garage with a three sided green screen made from door skin and held in place by 2x4 and 4x4. In general the prop was too close to the green screen, casting shadows and causing artifacts in the video, however with careful lighting I avoided most of that.

<p>I love the randomness of this!</p>

About This Instructable

1,252views

10favorites

License:

Bio: Dinosaur Rex's lived in Texas. And that's a great big place In the United States. Still they both seem small, 'cause if I ... More »
More by GregRank:Grandpa's Dream Chromebox Sound Focuser The "GO" House - micro living with 54 square feet 
Add instructable to: