Print PDF
Favorite
Email
Step 5How to use the die:
Cutting the pasteboard to the double of the size that will have the eyeglasses, and to fold it at the middle. I folded it horizontally, but this is your choice.
Calculating (test and error does not fail never) the position that will have each hole.
Support the fold pasteboard over the edge of the die, in the reckoned position.
With the round stick, rolling it over the pasteboard, the cut is produced. One can feel it and to see it, is very easy.
Turning 180 degrees the pasteboard toward the right, the second hole will remain in a symmetrical position to the first one.
The discarded pieces of pasteboard must be put inside the hole, to help to maintain the sharp leaf in their place.
Calculating (test and error does not fail never) the position that will have each hole.
Support the fold pasteboard over the edge of the die, in the reckoned position.
With the round stick, rolling it over the pasteboard, the cut is produced. One can feel it and to see it, is very easy.
Turning 180 degrees the pasteboard toward the right, the second hole will remain in a symmetrical position to the first one.
The discarded pieces of pasteboard must be put inside the hole, to help to maintain the sharp leaf in their place.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
