Print PDF
Favorite
Email
Step 3Now...We Can Begin...
Step 1 :Start your Engine and Active the APU Gen,Air Conditional...
Step 2 :Set your Flaps to 8 degrees..
Step 3 :Push Up the Throttle to Maximum so that your plane will move...
Step 4 :Slow Down the plane by Push Down the Throttle and Touch the Brakes...Bcoz you are not to be able to fly first...you must go to the runway....
Step 5 :After you go to the runway...wait the Control tower Says"you are now clear to take off "
Step 6 :After he say " you are now clear to take off "Push the Throttle to Maximum and Using the Controller to Control your plane....
Step 7 :When the plane is run faster than...you can Pull the Controller so your plane will fly...
Step 2 :Set your Flaps to 8 degrees..
Step 3 :Push Up the Throttle to Maximum so that your plane will move...
Step 4 :Slow Down the plane by Push Down the Throttle and Touch the Brakes...Bcoz you are not to be able to fly first...you must go to the runway....
Step 5 :After you go to the runway...wait the Control tower Says"you are now clear to take off "
Step 6 :After he say " you are now clear to take off "Push the Throttle to Maximum and Using the Controller to Control your plane....
Step 7 :When the plane is run faster than...you can Pull the Controller so your plane will fly...
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
