Print PDF
Favorite
Email
Step 8Final touches!
I wanted to make a cover for the underside of the table so you couldn't see all the wires and stuff. i added these spare pieces of wood to the inside and got some more 1/8in MDF and made a backing. Its held on by 6 screws so you can access the wiring fairly easily still.
I also routed out a recess for the hinge to sit in so it would be flush. I also added a chain to both sides so the lid wouldn't fly all the way back when you opened it.
I also routed out a recess for the hinge to sit in so it would be flush. I also added a chain to both sides so the lid wouldn't fly all the way back when you opened it.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
