Instructables

How To Make A Cheap USB Powered Fan

Picture of How To Make A Cheap USB Powered Fan
How to make a cheap fan from parts bought at the dollar store. This fan can be made for about $2 (plus tax), unless you can buy a double ended USB wire, then you can make 2 USB fans for $3 (plus tax). That definately beats the $15 or $20 stores tend to charge for these types of devices.

This is my first instructable so I wouldn't mind if people posted their opinion.

NOTE: Pictures will be added at a later date when I make the second fan, the first one (which I am writting this instructable from) was simply a test to see if it would infact work.
 
Remove these adsRemove these ads by Signing Up

Step 1: Preparing the USB Cable

DSCF1241.JPG
DSCF1242.JPG
Cut the USB cable to the length you require (long if you need to attach fan to a USB port in the back of your computer). Becareful not to cut the inner wires, use a wire stripper (if you have one) or simply a pair of scissors (be careful not to cut yourself).

Once the protective jacket has been removed, remove some of the shielding such that the 4 wires which make up the USB cable are exposed.

Cut the white and green wires short (to the protective jacket) as they will not be needed for powering the device.

Step 2: Preparing the power wires.

CAREFULLY, remove the outter protective jacket from the red and black wires to expose the copper wire underneath. Twist the exposed wire (if not already done) to make your life easier.

Step 3: Taking apart the fan.

Picture of Taking apart the fan.
Remove the battery cover as well as the screw holding the two halves of the fan together (becareful not to loose any small parts such as screws/switches).
1-40 of 48Next »
ssatyam29 days ago

how to make mini fan blades

ssatyam29 days ago

how to make mini fan blades

mnowak75 months ago
jakobus91 year ago
Héhe, nice during these hot days! thanks :D
IMG_3431.JPG
dsyn7 years ago
I am incredibly interested in learning more about powering things using USB. I have been wondering if there is anyway to power larger devices, like things you have to plug in to an outlet. Think a computer with multiple USB ports combined as one power source could do it?
bmlbytes dsyn7 years ago
No I don't think that would work. Computers output at 5v DC. Most electronics require 120v AC. Even if you got the computer to output 12v DC and used a DC to AC converter, there still wouldn't be enough amperage.
I built my own AC to DC converter. 120VAC to 12VDC with a 3A Transformer that gives me enough juice to run 3 fans at full power.
20120807_183701.jpg20120807_183706.jpg20120807_183718.jpg
I WANT TO CREATE AN USB CASE FAN! THEN I WOULD LIKE TO HOOK IT UP TO MY CEILING MOUNTED EPSON PROJECTOR WITH POWERED USB PORT. ITS PURPOSE WOULD TO BE HELP COOL THE PROJECTOR AND ALSO IF IT HAD BLUE LED LIGHTS IT WOULD LOOK WAY COOL. I FOUND A FAN THAT WOULD RUN WITH 5V , BUT WHAT IS THE AMP OUTPUT FOR A USB PORT. VERBSKY
calm down there sparky....
See that key between Tab and Shift? hit it. see what happens? you don't look like a moron anymore.
actually there is a way to make it. I'm not quite sure yet. I am currently researching it. I found a site that sells them. Origin of course is from china.

http://parco.manufacturer.globalsources.com/si/6008810248883/pdtl/USB-fan/1002235694/USB-Desk-Fan.htm
lukkbox dsyn5 years ago
1. if your near a power source, use the plug socket, not your computer 2. if your away from a power source, there is no way your laptops battery would last longer than a minute 3. this is just constructive critiscism offered before you start albert einsteining what is, a bad idea love lukkbox x
spartan0943 years ago
Here's mine. Using an old Play Station (the fat one) fan. I super glued it to a cd, and used an old pointless screw (bolt?) as a sort of pole to keep the cord in place. Put's out a considerable amount of air. I know it's sloppy, but the PS2's fan wires must have been around 30 gauge, ridiculously small. I did solder btw.
Home-Made-USB-Fan.png
Um? I was wondering it might be silly of me to ask
but can u tell me step by step how you made that fan work without using the ps2....I took my fan out but I'm having a hard time getting it to work if you can msg me back I would appreciate it thanx....
If I can remember right, the fan had two wires coming out, red/black (power/ground). They ran into some sort of connector, which I just snipped off. To provide the power, I used an extra usb cord. Inside this usb cor are many wires, you only need the red/black (once again, power/ground)

So first off, you need to, useing extreme care, strip the red and black wires on the fan, then set them aside.

Next, snip one end of the usb cord off (i was using an old cord to an mp3 player, so i snipped off the mini end). Strip off like a 2 inch part of the outer layer of the usb, then snip all the wires except for the red and black ones off. As you could imagine, the next step is to strip the red and black wire of the usb.

Finally, you have to try and solder the wires together (red to red, black to black). This is pretty damn tough due to the fan wires being short and thin, so you might need an extra set of hands helping you out. Tape it up when you're all done (taping the wires separately to insulate them) and plug it in to a computer usb port.


If you need more help go ahead and ask, I could even sketch out some diagrams if you need me too no problem.
i just an awesome project....
you can connect more then one fan to one USB port soo there we dont have to use resistors.
but can anyone explain we how must amount of energy is required to operate a FAN that you have used.
and then its equivalent resistance for 1 fan


thanks for the info
nodoubtman2 years ago
I tried and the computer went off ... so don't try this, this motor needs a resistor, but how much Ohms??

Thank You!
CYa! :)
trebuchet038 years ago
Most (if not all) modern USB controllers have fail safe and short protection. I know on my computer if it find a short, windows has a popup saying that oh, BTW, you drew too much current and the hardware is now shut down... Typically a restart will turn the device back online... I noticed that knoppix did not tell me that the board shut down... I can't remember if fedora or Cent said anything... but in any case, the controller shut itself down.
I have a laptop that i took apart (took off the keyboard and stuff) and it was running while i was putting on the heat shield (not a smart thing to do) and it sparked a few times, big white and blue sparks, then it shut down. i dont know if that has a connection to that, but thats what happened.
From what I understand damage to the USB port and/or the device could result from overloading the voltage. I made a similar setup for a desktop fountain that ran on 2 "AA" batteries and used an LM317 adjustable regulator to drop the voltage from 5 to 3VDC. There are online calculators to figure out what resistances you need to run for a given output... Here's a link to some general info http://www.national.com/mpf/LM/LM317.html
btw: no damage done at all
well today actually i shorted otu several usb ports by mistake when i was trying to do some usb fans without the proper materials and nothing happened.. windows poped up and said unplug the devise and press reset and that was it... happened about 15 times lol.... had to test it and stuff :)
TooShort47 years ago
Scared me to death. Did that but with a clock and it kept sparking until i unplugged it.
lol you know there is a clock on your computer already .... right? thanks for the laugh bro! x x x x
If you have like a ten or fifteen foot cord added on to it would you have to add a resistor or would there wouldn't be enough voltage to go through it?
litobro6 years ago
good tutorial, i tried it with a dollar store flashlight but i think i burnt it out... now how am i supposed to look at my computer hardware?
jian6 years ago
hhhmmm... chip and the motor is much stronger than ordinary usb fan, but the problem is, this motor has a brush , the current is flowing from the brush to commutator so when you always use it the brush will worn out some of this motor uses carbon brush for longer life span, the real usb fan motor is brushless this called induction motor, same as the electric fan, the one you use is conduction motor.
TID-dimond6 years ago
u hooked up the usb cable the wrong war m8 cos you put the red onto the black which conects to the motor _____________________________________________________
playstation-3-unwrapped-20061024090250511.jpg
r0ck3t3r6 years ago
i made a usb powered radio I got from dollar tree. Total cost was 2 dollars and I just twisted the wires together like I do with telecom stuff and it worked just fine. I added some electrical tape to keep it from shorting and now I have a nice little radio to listen to on my laptop. I am thinking about integrating it with the laptop. That would be fun.
popit6 years ago
Now I have a USB powered fan..... I was trying to get it to work. I went to this instructable and realized that I need the red and black wires... :D
MadBeaver7 years ago
this is very cool. I wonder if you could attach the wires to a light bulb to make a flashlight thing?
definately not a lightbulb, they take a lot more than 100mA of current. You could attach an LED with a resistor (to limit the current) though.
thet would be nice :) and then put it in a nice case too :P or you could make a flashlight ocnnected to a usb-pots (a LED one)
If you had a small enough lightbulb (like the ones in flashlights) then yes you could. It would be even eaiser to attach an LED to it.
Oh, and btw, to convert ohms to voltage.. heres your formula..
V = I x R
jk i wont make it that hard. this will do it for u
http://www.csgnetwork.com/ohmslaw.html
*goes and looks for his box fan and 24 usb cables*
LordV7 years ago
You would have to convert Ohms to voltage, cause resistors are in Ohms.
boocat7 years ago
Yeah; ya have to tell me which resistor to use!
techhappy7 years ago
Howdy, thanks for the project info. I went ahead and built a usb fan and it seemed to work, until the motor burned out. On the last note in the last instruction, you mentioned using a resistor to bring the voltage down from 5volts usb to 3 volts for the fan. I am ready to give it another shot and wondered if you could share with us what resistor you used and where we could pick one up. I looked up info on resistors and got lost quickly. Any help would be greatly appreciated! Thanks!
bicostp7 years ago
Ah, the dollar store. The perfect place to get cheap things to take apart. In this case, a motor, some plastic, battery contacts, LEDs and 2 cheap batteries that could run a watch for all of 10 minutes... all for a buck. I've gotta go there this week! (Not today, since it's the Mass Sales Tax Free weekend... all the Rhode Islanders swarm the state... jonesman: USB puts out 5 volts DC.
1-40 of 48Next »
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!