Step 1: You'll Need Two Simple Things...
Duck tape, and scissors! You will not need scissors if you rip your duck tape.
Step 2: Cut 8 Pieces That Are 1 Foot Each
Simple. Just cut well, 8 pieces of duck tape that are 1 foot or 12 inches each!
Step 3: Fold ONLY 6 Of Your Pieces In Half
Only fold 6 pieces in half!! Do not fold all of them!
Step 4: Make Your "Skeleton"
Put your folded pieces in the shape of a star kind of. First make a cross, then add strips in between and around. It had to be even.
Step 5: Tape Your Skeleton
Step 6: Time To Use Your 7th And 8th Strip
Cut them into fourths. These will connect your skeleton and make the bowl.
Step 7: Connecting Your Skeleton
Connect one strip to the next, make it curved. I think that the first connection is the hardest, so it will be easier as you go along. If you need more pieces for sticking, cut more.
Step 8: Covering The Outside
Be careful! Your bowl right now is very fragile! Pat the strips down gently. After you cover the inside, you can use your hand and push the rest down.
Step 9: Covering The Inside
Make sure the lumps are gone! Just put strips inside until you see no sticky parts.
Step 10: Trim It
Trim your bowl
Step 11: Final Thoughts
My bowl was kinda bad and I VERY MUCH HOPE yours didn't too. I am so sorry if it did. Also, you can use your bowl as a hat! I recommend not eating out of your bowl though....... Thanks for checking this out and comment, follow, vote, and favorite! Thanks again!