Introduction: How to Make a Phone Charm on the Loom.

Picture of How to Make a Phone Charm on the Loom.

Step 1: What You Will Need.

Picture of What You Will Need.

1 loom.
1 hook.
41 white rubber bands.
44 blue rubber bands.

Step 2: Putting on the Blue Rubber Bands.

Picture of Putting on the Blue Rubber Bands.

Put them on like shown on the pictures

Step 3: Putting on the White Rubber Bands.

Picture of Putting on the White Rubber Bands.

Put on like shown on the pictures

Step 4: Looping the Bands.

Picture of Looping the Bands.

Loop as shown on the pictures.

Step 5: Tying the Rubber Bands.

Picture of Tying the Rubber Bands.

Tye like shown on pictures.

Step 6: Tying the Final Rubber Band.

Picture of Tying the Final Rubber Band.

Put the hook through the bands on the loom, then put the band on the hook. Pull the hook back through while holding one side of the band. Put both sides of the band on the hook. Take the band that is farthest away from you and pull it off and then pull your hook up until the band is like a knot and you are done.

Comments