Print PDF
Favorite
Email
Step 7Sanding & Polishing
Start out with some rough sandpaper, and smooth out any lumpy areas and imperfections. Gradually sand all the way up to your highest grit sandpaper. Mine was 600, but 6000 is recommended. Smooth the pendant hole if it is needed. After that you can rub it with some polishing compound, which is when you really start to see it shine!
Repeat this process until it is as smooth and shiny as you like!
Repeat this process until it is as smooth and shiny as you like!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
