Introduction: How to Make a Single Rainbow Loom Braclet

This is how you make a single bracelet on a Rainbow Loom! Don't forget to favorite, share and follow me!

Step 1: What You Will Need

For a bracelet, you will need 25 rubber bands (in your choice of color), a loom, a hook, and a C-clip. You can have as many colors as you want, I am just using red.

Step 2: Looming

Now, you will take the first rubber band (make sure that the red arrow is pointing up) and hook it on to the first peg. Then attach the other end to the one diagonally above it (it doesn't matter what side). Continue these steps until you get to the top.

Step 3: Looming 2

Now, you will want to turn the whole loom around (so that the red arrow is pointing down). Then, grab your hook and skip the first peg, and reach into the first band and grab the second with your hook, the bring it to the third peg and attach it. Continue that step until you come to the end.

Step 4: Casting Off

Now, take your C-clip and attach it to the last pair of bands that you used. Start to take it off, form side to side, side to side, then attach the C-clip to the other end, and you have a single bracelet! Make sure to favorite, share and follow me! I post every week! PEACE!

Comments

About This Instructable

4,423views

2favorites

License:

More by CollosalSquid:How To Make A Single Rainbow Loom Braclet
Add instructable to: