Introduction: How to Make a Squeaking Pen

Ever bored in class? All you need is an old Squeaking pet toy and a pen!

Step 1: Find a Squeaker

This is probably the hard part of this project so after this we're gonna flow. Find one of these squeakers! They're in pet toys or anything that squeaks!

Step 2: Take the Squeaking Part Out

Pliers aren't necessary, it might damage it. Use your fingernail and slip the squeak piece out of the air chamber

Step 3: Take Then End Cap Off of the Pen

Use pliers, they might be pretty tight

Step 4: Put the Squeaker in the End!

It should be a perfect fit

Step 5: Poke Some Holes

Get a sharp thin needle or drill and poke some holes in the side of the pen, or else air won't pass through it

Step 6: Squeak Away!

Comments

author
Linkin_J_Knex (author)2015-10-25

hehe gr8 idea!

author
DIY Hacks and How Tos (author)2015-10-24

HA! That would be a lot of fun to use to mess with people.

About This Instructable

572views

18favorites

License:

More by henryqiu:How To Make A Squeaking PenStrip A Wire With... Dental Floss?
Add instructable to: