With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Okay, this has been what I have been occupying my time with the past day (Well, more like the past hour) But I made a tutorial on how to make an invis...
You need a metal wall brace (The L-shaped metal thing with three holes) Mine happened to be a 5" X 1", but I suppose bigger would be cool too, (it wou...
Make sure when you choose the drill bit to drill with that it is a little smaller in diameter than the screw. If you hold the screw up behind the bit,...
You need a hardcover book (To be the base layer) and if your books are like mine and have covers, and you're like me and like to keep the covers nice ...
Now that the cover is out of the way (if you ever had that problem) take one of the sticky velcro strips and stick it right in the center of the back ...
Now, find a stud in the wall and mark it with a pencil (Try to stay towards the center of it because when you level it might require twisting the meta...
Make sure the brace is straight, AND ALSO MAKE SURE THAT THE VELCRO IS ON THE BOTTOM, FACING THE FLOOR. You can kinda see it in the picture, that litt...
When you have it level (or sort of level) mark the holes, drill the top one first (make sure you go straight into the wall to avoid breaking off the b...
You can now set your book (with the back cover hanging down) on the brace. Once you have it on there, look under to match up the velcro on the cover a...
Now you can stack them (the books)! It is a bit wobbly sometimes, make sure they are centered to avoid any mishaps. It might be better to have two bra...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »