With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
The Bear is an interesting paper airplane with a tri-tail configuration. TAA USAF Designation: F84-1
Required: 1 piece of 8.5 by 11 inch Paper Tape Scissors Optional: Pencil
Take your paper and fold it along its length.
Fold the corners into the center. Then pull the nose back and down.
Fold the corners into the center, though not all the way. Repeat on the other side and then fold the small flap below them up over it.
From their previous position fold the airplane in half. Then fold the wings approximately 3/4 in. up from the bottom. Repeat on the other side.
Cut the 3 vertical stabilizers out of the wing and fuselage. Each should be 3/4 in. tall. Allign them pefectly with the back of the wing.
Tape the plane's front and back together in the cited places in the picture.
The Bear is a slow dart and should be launched like a dart, pitched down.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »