Instructables
loading
loading
Picture of How To Make The Destroyer Dart Paper Airplane
So named for its Wild Weasel role, the Destroyer Dart is also a good interceptor.



TAA USAF Designation: F105-1 
 
Remove these adsRemove these ads by Signing Up

Step 1: Materials

Picture of Materials
Required:
1 piece of 8.5 by 11 inch Paper
Tape
Optional:
Scissors
Pencil

Step 2: X Fold To Start

Picture of X Fold To Start
Instructables 12a 024.jpg
Instructables 12a 025.jpg
Instructables 12a 026.jpg
Instructables 12a 027.jpg
Fold the paper from one corner to the other side and repeat on the same side.

Step 3: Cover Folds

Picture of Cover Folds
Instructables 12a 029.jpg
Instructables 12a 030.jpg
Instructables 12a 031.jpg
Instructables 12a 032.jpg
Instructables 12a 034.jpg
Pull the top down over itself and fold it as shown in the pictures.

Step 4: Preparation For The Security Fold

Picture of Preparation For The Security Fold
Instructables 13 002.jpg
Instructables 13 003.jpg
Instructables 13 004.jpg
Pull the corner into the center as pictured. Repeat on the other side, then fold the plane in half.

Step 5: Security Fold

Picture of Security Fold
Instructables 13 006.jpg
Along the airfoil line, fold the two flaps underneath the line.

Step 6: Fold the Wings

Picture of Fold the Wings
Instructables 13 008.jpg
Instructables 13 010.jpg
Fold the airplane in half along it's center. Then fold the wing down along the security fold. Repeat on the other side of the aircraft.

Step 7: Tape Your Aircraft

Picture of Tape Your Aircraft
Tape along the bottom of the security fold, the back of the security fold and the rear of the airplane.

Step 8: Flight

Picture of Flight
Your Destroyer Dart is now ready for flight. Enjoy!