Introduction: How to Make the Goblin Paper Airplane

Picture of How to Make the Goblin Paper Airplane

Square but able, the Goblin is able to fly long distances at a fair pace.

TAA USAF Designation: F13-1

Step 1: Materials

Picture of Materials

1 Piece of 8.5 by 11 inch paper
1 large paper clip

Step 2: Begin Folding

Picture of Begin Folding

Take your paper and fold it in half length-wise.

Step 3: Pull the Paper Back

Picture of Pull the Paper Back

Begin folding the paper down 0.75 inches 5 times.

Step 4: Fold the Wings

Picture of Fold the Wings

Now fold the plane up along its center. Then, about 0.75 inches up from the center (the bottom), fold the wing down and crease it so it is perpendicular to the ends. Then repeat on the other side.

Step 5: Tape and Clip Your Goblin

Picture of Tape and Clip Your Goblin

Tape your Goblin's front and back, then tape the edges of airfoil to the outboard wing as well. After the airplane is taped up, put the paper clip on it.

Step 6: Flight

Picture of Flight

Your Goblin is now ready to soar to great lengths. Enjoy!


lil larry (author)2011-02-23

mine did a whole bunch of stunts! thanx! :D

About This Instructable




Bio: I am someone who mass produces paper airplanes and am always developing new designs. I post regular updates on Twitter and Google+. Follow me there ... More »
More by OrigamiAirEnforcer:How to Make the HyperAttacker Paper AirplaneHow to Make the StarRanger Paper AirplaneHow to Make the Aerowing Paper Airplane
Add instructable to: