How To Make The McDonnell Douglas F/A-18 Hornet Paper Airplane

Step 4: Applying The Wings And Horizontal Stabilizers

Unfold your wings and align your airframe above it. The spars should be over the second row from the chord when tape is applied. Excess that hangs over the leading and/or trailing edges should be trimmed. Tape should also be applied to the underside of the wing where the vertical stabilizer mounts connect. Once this is done, flip your airframe back, right-side up. Unfold your horizontal stabilizers and slide them through the fuselage. Apply tape to the undersides of the horizontal stabilizers as shown. This will complete your Hornet replica.