With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
A fast, long range and simple flying wing, the Skycruiser is a more compact version of the Skystreak. TAA USAF Designation: A75-1
Required: 1 Piece of 8.5 by 11 inch Paper Tape Scissors Optional: Pencil
Fold the paper along its width. Then fold it in half again, to result in fourths. Then open the paper. You should have a paper divided into four.
To fold your Skycruiser's counterweight, first align your paper so it is sitting lengthwise. Then fold the paper down 1 inch at a time to the width...
Fold your paper up in half and begin your cut 1 inch from the rear. Then cut into the wing an inch at a thirty degree angle.
First, fold the two fins in so they parallel the paper's center fold (you can check this by aligning their trailing edges with the rear of the wing). ...
Like many flying wing paper airplanes, the Skycruiser may have special needs. To fly this airplane, you cannot throw it but instead slowly push it for...
To fold your Skycruiser's counterweight, first align your paper so it is sitting lengthwise. Then fold the paper down 1 inch at a time to the width half fold. You should end up folding the paper about 6 times.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »