Picture of How To Make The Skyhunter Paper Airplane
A fast, long range and fighter jet-style paper airplane, the Skyhunter is a very cool paper airplane to fly.

TAA USAF Designation: A20-1
Remove these adsRemove these ads by Signing Up

Step 1: Materials

Picture of Materials
1 Piece of 8.5 by 11 inch paper
Scissors (for modifications only)

Step 2: Length Folding

Picture of Length Folding
Take your paper and fold it in half length-wise.

Step 3: X Folding

Picture of X Folding
Instructables 12a 025.jpg
Instructables 12a 026.jpg
Instructables 12a 027.jpg
Instructables 12a 028.jpg
Instructables 12a 029.jpg
Instructables 12a 030.jpg
Instructables 12a 031.jpg
Instructables 12a 032.jpg
Instructables 12a 034.jpg
Take the right or left corner to the paper and fold it to the length of the opposite side. Then repeat with the inverse arrangement. Then pull the front down to make a doubled layer. Then redo the X Folding, but at the lines, allow the paper to come out from it and pile on top of itself. Then repeat this on the other side.

Step 4: Pulling Forward The Nose

Picture of Pulling Forward The Nose
Instructables 12a 035.jpg
Instructables 12a 036.jpg
Instructables 12a 037.jpg
Instructables 12a 038.jpg
Instructables 12a 039.jpg
Instructables 12a 040.jpg
Instructables 12a 041.jpg
Instructables 12a 042.jpg
Instructables 12a 043.jpg
From the outer sections of the cover fold, pull the paper up to the front. Then repeat this on the other side. Proceed to then pull the paper in on itself again and do this on each side as well. Along the top of the section you just folded, fold the nose down. Fold the two separate tabs onto the side which has the repeatedly folded paper, but let the other side go to the "clean" side of the airframe.

Step 5: Tricky Nose Unfolding

Picture of Tricky Nose Unfolding
Fold the small front triangle to the "clean" side. The open all but the little triangles on the other side so it appears almost as flat as it was. 

Step 6: Tricky Nose Refolding

Picture of Tricky Nose Refolding
From the blunt front tip, pull the paper forward and then flatten and fold as pictured. The paper will come down on each side to compose two separate layers. Once the front is dealt with begin to fold forward the rear paper. Once you've pulled that forward, two triangles will form, one on each side.

Step 7: Fold The Wings

Picture of Fold The Wings
From about 3/4 of an inch up from the center, fold the wings down. The wings should remain parallel to the trailing edge. Repeat on the other side.
I just made this plane and I love it. Are there any plans on a successor?
No plans as of now, though I have previously given thought to new developments.
Well when you do let me know, i love the look of it. 2 quick things, are there any plans to make another Rocket Powered Airplane?(and is there a tutorial on here to make said rockets?) and I am having difficulties posting an instructible of the Skylance Paper Airplane video, but I am sending you the video link right now. P.S. In he video I am a bit nervous but I will get better.
I just made this plane and I love it. Are there any plans on a successor?
jetplane3 years ago
it would help if there was a video
OrigamiAirEnforcer (author)  jetplane3 years ago
I would make one, but I do not have the capability to make motion videos at this time.