With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
A fast, long range and fighter jet-style paper airplane, the Skyhunter is a very cool paper airplane to fly. TAA USAF Designation: A20-1
Required: 1 Piece of 8.5 by 11 inch paper Tape Optional: Pencil Scissors (for modifications only)
Take your paper and fold it in half length-wise.
Take the right or left corner to the paper and fold it to the length of the opposite side. Then repeat with the inverse arrangement. Then pull the fro...
From the outer sections of the cover fold, pull the paper up to the front. Then repeat this on the other side. Proceed to then pull the paper in on it...
Fold the small front triangle to the "clean" side. The open all but the little triangles on the other side so it appears almost as flat as it was.
From the blunt front tip, pull the paper forward and then flatten and fold as pictured. The paper will come down on each side to compose two separate ...
From about 3/4 of an inch up from the center, fold the wings down. The wings should remain parallel to the trailing edge. Repeat on the other side.
Fold the winglets up 3/4 of an inch from the wingtip. Repeat on the other side. Then tape the aircraft together. Optional: To make the forward f...
Like your average dart, the Super Sabre, the Skyhunter flies fast and far. It only needs to be pitched-down slightly but is otherwise to be thrown l...
Other than the aforementioned changes to the forward fin, I've only explored one modification to this airframe so far: A20-1AS "Air Superiority" Skyh...
Like your average dart, the Super Sabre, the Skyhunter flies fast and far. It only needs to be pitched-down slightly but is otherwise to be thrown like a normal dart.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »