Instructables
Designed to be the first conventional drone biplane, the Sparrow is a small paper airplane that has become just that. Its configuration enables its small wings to lay one on top of the other, minimizing its profile when looking from above or below. In addition, the Sparrow features several "modernization" measures that most of my cruiser designs have not featured.

The Sparrow traces its origins back to the YD142-1 drone "technology demonstrator" prototype, which featured a box wing. Although it performed well in testing, I chose not to make an instructable for the YD142-1. Despite being several months old, the prototype remains airworthy. After the YD142-1 was designed, the Moth "double delta" drone was designed and published. The Moth featured two delta wings, one inverse delta and the other mounted conventionally below, like the RC airplane it was inspired by. Although the Moth was quite capable and successful, I did not feel designing biplanes was an idea worth investing in, due to their intricate nature, especially when installing the wings.

In early January 2012, I received a request for a miniature, realistic biplane paper airplane. To answer this, I looked back on the YD142-1 and the Moth. Quite quickly the delta wings of the Moth removed it from consideration. The YD142-1, although capable, had a chord of 2 boxes, making the mounting of the wing approximative. At this point, I decided to design a new aircraft, with some conceptual characteristics similar to the YD142-1 but with a somewhat different configuration.

After some design studies, I retained the similar Voyager's vertical and horizontal stabilizers. The wings and spars would be of entirely new design, however. Rather than have a box wing like the YD142-1, I decided the XD200-1 (which would later be named the Sparrow) would have a strut braced pair of wings. The required wing size was calculated from existing data from the Voyager paper airplane and the prototype was assembled. On its first flight, the Sparrow proved itself a worthy airplane, and it was given the slot for Instructable 155.

Some potential experiments and demonstrations possible with this airframe include:
  • Glide ratio
  • Weight and balance
  • Hangtime versus other aircraft
  • How surface inequality can affect aircraft (geometry/shape studies, flight dynamics)
  • How each of Newton's three laws affect aircraft (a person acting as an external force on the airplane during launch and/or the air acting on the airplane as an external force characterized as drag (first law); the force of the airplane hitting something and transferring the force its built up with its mass and acceleration (second law); and lift versus gravity and thrust versus drag (third law))
  • In a turn, circular motion is accomplished by lift directed toward the center of the turn.

TAA USAF Designation: D200-1
 
Remove these adsRemove these ads by Signing Up
infob2 years ago
You are Great.
Thanks a lot!
OrigamiAirEnforcer (author)  infob2 years ago
Glad you like it! :)
What does "Neutral or negative altitude" mean? Also, is that graph paper sorted rigid like am almost cardboard flexibility or is it just like normal computer paper?
Neutral or negative attitude refers to the alignment of the nose. If the nose is pointed straight forward, not up or down, it is at a neutral attitude. If the nose is pointed down, it is at a negative attitude. The most similar paper thickness is notebook paper.
RSV262 years ago
can you measure it centimeters ?
OrigamiAirEnforcer (author)  RSV262 years ago
Unfortunately, I cannot. The only graph paper I can ever find is inches. However, if you have paper of an equivalent length and convert the units of measurement, it can be made with metric.