With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
A fast, small and agile little plane, the Starfire is a hybrid of the traits of the Hammerhead and Spirit paper airplanes. It is another lightweight p...
Required: 1 Piece of 8.5 by 8.5 inch paper Tape Optional: Ruler Pencil
Start by folding one corner of paper to the one on the other side's bottom. Then fold the other corners down into the center (although not equally). ...
Flip it over to the "clean" side, and pull the point of the nose down to the rear end of the paper. Then flip the paper over again. Proceed to pull bo...
From its position on the last step, the paper airplane should now have the opposite side facing up. From there, pull the folds open and then flatte...
Fold your airplane up in half along its center. Then measure 7/8 (0.875) inches up from the center fold and mark on each end at this height. Mark it, ...
Fold your tail by folding your right wing down and then pull the rear tip of the paper up. Do so and pull it up so that a crease reaches the rear of t...
Without damaging your tail, fold the canard's ventral fins up as shown. They should be folded up so their fronts meet that of the canard. The outer...
Tape the Starfire up at its front, back and its bottom. The Starfire be taped as it is in the fourth picture.
The Starfire is a nimble little airplane wonderful for the role of aerial demonstrator. Although it is an excellent craft, it can be somewhat finicky ...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »