Introduction: How to Make the Stratojagger Paper Airplane

Picture of How to Make the Stratojagger Paper Airplane

Fast, long range and simple, the Stratojagger is a great paper airplane.







TAA USAF Designation: F135-1 

Step 1: Materials

Picture of Materials

Required:
1 Piece of 8.5 by 11 inch Paper
Tape
Optional:
Scissors
Ruler
Pencil

Step 2: Start Folding

Picture of Start Folding

Take the corner and fold it in. Unfold then fold it in again.

Step 3: Continue Folding

Picture of Continue Folding

Fold the paper "hot dog"-style

Step 4: Fold the Corners In

Picture of Fold the Corners In

Fold the corners in as shown.

Step 5: Fold the Corners in Again

Picture of Fold the Corners in Again

Fold them in one more time as pictured.

Step 6: Fold the Top Down

Picture of Fold the Top Down

Fold the nose down along the preexisting fold lines.

Step 7: Fold the Inner Paper Out

Picture of Fold the Inner Paper Out

Fold the paper out as pictured and repeat on the other side.

After that your aircraft should appear as it is in the 2nd picture.

Step 8: Fold the Corners in Again

Picture of Fold the Corners in Again


Fold the corners down from

Step 9: Fold the Lock Up

Picture of Fold the Lock Up

You now fold the lock along that "preexisting" line mentioned in the last step.

Step 10: Fold in Half and Fold the Wings

Picture of Fold in Half and Fold the Wings

Fold the plane along it's center.

Then fold the wings down to the bottom of the fuselage.

Step 11: Finished

Picture of Finished

Now tape where shown.

Now you are ready for flight.

Comments

CEWGamer (author)2014-12-27

This is one of your designs that I failed to make.I always ended up stuck at the Step 7 section so I gave up.How did you do that?

On step 7, you are trying to pull the paper out toward you along creases made in the steps leading up to step 7.

killerjackalope (author)2010-03-06

The name stratojagger is officially being applied to some random object I own, plus it's now a term of endearment...

Cool plane though... 

Thanks. The airplane's name was not named for the denotation, but simply with "Strato-" as a reference to altitude and "jagger" being a random thought of mine. Thus, it received the name "Stratojagger".

About This Instructable

3,128views

3favorites

License:

Bio: I am someone who mass produces paper airplanes and am always developing new designs. I post regular updates on Twitter and Google+. Follow me there ... More »
More by OrigamiAirEnforcer:How to Make the HyperAttacker Paper AirplaneHow to Make the StarRanger Paper AirplaneHow to Make the Aerowing Paper Airplane
Add instructable to: