Step 2: Begin Construction
After the fuselage is made, take another sheet of paper that is folded in half along the lines of boxes. Mark out the wing as shown (3 boxes in length, each with an intersection sweep of 1/4 (1 box length lost for every 4 boxes outward from the fuselage.). Then cut it out. Then mark and cut out the horizontal stabilizers as shown (2 boxes in width, 1 box in length with a swept portion of 1 box of length decaying every 2 boxes of width).
Solid lines indicate places to cut. Dotted lines indicate fold lines.
Note: 1 box = 0.25 inches